Standard chassis
NOTE:
After wheel geometry adjustment, complete Steering Angle Sensor calibration using scan tool.
STANDARD CHASSIS DIMENSION
| Rear wheels | Dimension (mm) | ||||
| Angle | 16" | 17" | 18" | ||
| degrees (1/100) | degrees (minutes) | ||||
| Toe, total | 0.24° ±0.01° | 0°14' ±0°6' | 1.71 ±0.57 | 1.89 ±0.63 | 2.06 ±0.69 |
| Toe, per side | 0.12° ±0.01° | 0°7' ±0°6' | 0.86 ±0.29 | 0.94 ±0.31 | 1.03 ±0.34 |
| Camber | -0.70° ±0.30° | -0°42' ±0°18' | |||
| Front wheels | Dimension (mm) | ||||
| Angle | 16" | 17" | 18" | ||
| degrees (°) | minutes (') | ||||
| Toe, total | 0.24° ±0.08° | 0°14' ±0°5' | 2.00 ±0.57 | 2.20 ±0.63 | 2.40 ±0.69 |
| Toe, per side | 0.12° ±0.06° | 0°7' ±0°4' | 1.00 ±0.29 | 1.10 ±0.31 | 1.20 ±0.34 |
| Camber | -0.80° ±0.50° | -0°48' ±0°30' | |||
| Difference between left and right-hand side | Maximum | ||||
| ±0.50° | ±0°30' | ||||
| Caster | 3.20° ±0.50° | 3°12' ±0°30' | |||