LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2010 >> 9-5 >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Climate System >> Technical data >> Refrigerant System Specifications

Refrigerant System Specifications

Application Specification
Metric English
Abrupt refrigerant loss 60 ml (1) 2.0 oz (1)
When charging system after recovery 20 ml 0.7 oz
Compressor Replacement 
The service compressor is shipped with a specified amount of PAG oil.
NOTE: Compressor failure can occur if the oil removed during refrigerant recovery is not replaced.
Compressor oil (Sanden PXE16) 110 ml 3.7 oz
Compressor Oil (Delphi SP17) 150 ml 5.0 oz
Condenser Replacement 30 ml (2) 1.0 oz (2)
Evaporator Replacement 40 ml (2) 1.3 oz (2)
Any Line Set (Hose/Tube or Tube Assembly) Replacement 20 ml (2) 0.7 oz (2)
Total System PAG Oil Capacity - Sanden 110.0 ml 3.7 oz
Total System PAG Oil Capacity - Delphi 150 ml 5.0 oz
R-134a 
Refrigerant Charge (R-134a) 0.60 kg 1.5 lb
(1) Abrupt refrigerant loss due to large leak, hose rupture, collision, or pressure relief valve opening. Conditions that allow the refrigerant to seep or bleed off over time do not cause this oil loss. Upon replacement of a component that caused a large refrigerant loss, also add the required amount of oil for the particular component.
(2) If more than the specified amount of PAG oil was drained from a component, add the amount drained.
scientia non olet · About LEMON Manuals