Right Side Object Sensor Malfunction
- Ignition OFF, disconnect the harness connector at the B94R Side Object Sensor - Right.
- Test for less than 5 Ω between the ground circuit terminals listed below and ground:
- If greater than the specified value, test the appropriate ground circuit for an open circuit/high resistance.
- Ignition ON, verify that a test lamp illuminates between the B+ circuit terminal 7 and ground.
- If the test lamp does not illuminate, test the B+ circuit for a short to ground or an open/high resistance.
- Ignition OFF, disconnect the harness connector at the B94L Side Object Sensor - Left.
- Ignition ON, test for less than 0.3 V between the serial data circuit terminal 5 and ground.
- If greater than the specified value, test the serial data circuit for a short to voltage.
- Test for infinite resistance between the serial data circuit terminal 5 and ground.
- If not the specified value, test the serial data circuit for a short to ground.
- Test for less than 5 Ω between the serial data circuit terminal 5 at the B94L Side Object Sensor - Left harness connector and the serial data circuit terminal 5 at the B94R Side Object Sensor - Right harness connector.
- If the value is greater than the specified value, test the serial data circuit for an open circuit/high resistance.
- If all circuits test normal, replace the B94R Side Object Sensor - Right.