LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2010 >> 9-5 >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Management And Fuel System, V6 (2 Of 5) >> DTC P0100: Mass Air Flow (MAF) Sensor Circuit; DTC P0102: Mass Air Flow (MAF) Sensor Circuit Low Frequency; DTC P0103: Mass Air Flow (MAF) Sensor Circuit High Frequency >> Circuit/System Verification

Circuit/System Verification

  1. Allow the engine to idle for 1 minute and check the diagnostic trouble code information with a diagnostic tool. Diagnostic trouble codes P0100, P0102 and P0103 must not be activated.
  2. Operate the vehicle within the conditions for running the DTC to verify the DTC does not reset. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
scientia non olet · About LEMON Manuals