LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2010 >> 9-5 >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Bus And Diagnostics Communication >> Technical data >> Rear Differential Clutch Control Module Scan Tool Information >> Rear Differential Clutch Control Module Scan Tool Data Parameters

Rear Differential Clutch Control Module Scan Tool Data Parameters

Parameter Expected Value Description
Operating Conditions:  Ignition is ON, engine OFF, and the vehicle is stationary.
Left Front Wheel Speed Sensor 0 The scan tool displays 0-160 km/h (0-99.5 MPH). The scan tool displays 0 km/h (0 MPH) when the vehicle is not moving or is moving at speeds less than or equal to 0 km/h (0 MPH).
Left Rear Wheel Speed Sensor 0 The scan tool displays 0-160 km/h (0-99.5 MPH). The scan tool displays 0 km/h (0 MPH) when the vehicle is not moving or is moving at speeds less than or equal to 0 km/h (0 MPH).
Rear Differential Clutch Control Module Temperature Varies The scan tool displays °C. The scan tool indicates a range from -40 to 215 °C.
Rear Differential Clutch Pump Motor Current 0 The scan tool displays the current in mA through the pump motor.
Rear Differential Clutch Solenoid Valve Current 0 The scan tool displays the current in mA through the rear differential clutch solenoid valve.
Rear Differential Clutch Status Temporarily Disabled The scan tool displays either Normal, Temporarily Disabled, Temporarily Limited, Malfunctioned, or Externally Disabled.
Rear Drive Clutch Solenoid Valve Current 0 The scan tool displays the current in mA through the rear drive clutch solenoid valve.
Rear Drive Clutch Status Temporarily Disabled The scan tool displays either Normal, Temporarily Disabled, Temporarily Limited, Malfunctioned, or Externally Disabled.
Right Front Wheel Speed Sensor 0 The scan tool displays 0-160 km/h (0-99.5 MPH). The scan tool displays 0 km/h (0 MPH) when the vehicle is not moving or is moving at speeds less than or equal to 0 km/h (0 MPH).
Right Rear Wheel Speed Sensor 0 The scan tool displays 0-160 km/h (0-99.5 MPH). The scan tool displays 0 km/h (0 MPH) when the vehicle is not moving or is moving at speeds less than or equal to 0 km/h (0 MPH).