| Operating Conditions:
Ignition ON |
| Antenna Module |
Enabled |
The scan tool displays Enabled or Disabled. This indicates if the system uses an antenna module and the output status between the radio and the antenna module. |
| Auxiliary Audio Input |
Present |
The scan tool displays Present or Not Present. This parameter displays active when an auxiliary input is connected. |
| Battery Voltage |
Varies |
The scan tool displays volts. This is the voltage at the input to the radio. |
| Digital Radio Receiver |
Present |
The scan tool displays Present or Not Present. This is the state of the Digital Audio Broadcast. |
| Phone Signal |
Present |
The scan tool displays Present or Not Present. This parameter will display wether this system uses discrete a phone arbitration or not. |
| Power Moding |
Run |
The scan tool displays Off, Accessory, Run or Crank Request. This is the power mode radio. |
| Rear Seat Audio |
Intermittent |
The scan tool displays Present or Not Present. This parameter displays Present if the system detects a rear seat audio module. |
| Radio Signal Strength |
Varies |
This displays the signal strength in dB. This is the signal strength of the radio signal. |
| Theft Lock Armed |
Learned VIN |
The diagnostic tool shows Programmed Vehicle Identification Number or No Vehicle Identification Number. This is the status for Vehicle Identification Number programming in the radio. |
| Radio Theft Lock Status |
Inactive |
The scan tool displays Active or Inactive. This is the state of the theft lock system. |
| Valet Mode Status |
Inactive |
The scan tool displays Active or Inactive. This is the state of the valet mode. |
| Video Display 1 |
Inactive |
The scan tool displays Active or Inactive. When the rear video display 1 is ON, the scan tool will display Active. |
| Video Display 2 |
Inactive |
The scan tool displays Active or Inactive. When the rear video display 2 is ON, the scan tool will display Active. |
| End Model Part Number |
Varies |
The scan tool displays the End Model Part Number. |
| Boot Software Part Number |
Varies |
The scan tool displays the boot software ID number. |
| Calibration Part Number 1 |
Varies |
The scan tool displays the software module ID 1. |
| Calibration Part Number 2 |
Varies |
The scan tool displays the software module ID 2. |
| Calibration Part Number 3 |
Varies |
The scan tool displays the software module ID 3. |
| Calibration Part Number 4 |
Varies |
The scan tool displays the software module ID 4. |
| Calibration Part Number 5 |
Varies |
The scan tool displays the software module ID 5. |
| Calibration Part Number 6 |
Varies |
The scan tool displays the software module ID 6. |
| Calibration Part Number 7 |
Varies |
The scan tool displays the software module ID 7. |
| Calibration Part Number 8 |
Varies |
The scan tool displays the software module ID 8. |
| Calibration Part Number 9 |
Varies |
The scan tool displays the software module ID 9. |
| Calibration Part Number 10 |
Varies |
The scan tool displays the software module ID 10. |
| Calibration Part Number 11 |
Varies |
The scan tool displays the software module ID 11. |
| Calibration Part Number 12 |
Varies |
The scan tool displays the software module ID 12. |
| Calibration Part Number 13 |
Varies |
The scan tool displays the software module ID 13. |
| Calibration Part Number 14 |
Varies |
The scan tool displays the software module ID 14. |
| Calibration Part Number 15 |
Varies |
The scan tool displays the software module ID 15. |
| Calibration Part Number 16 |
Varies |
The scan tool displays the software module ID 16. |
| Vin Digits 2-17 |
Varies |
The scan tool displays the vin digits 2-17. |
| Digital Radio Receiver ID |
Varies |
The scan tool displays the Digital Audio Broadcast receiver ID. |
| DVD Region Code |
Varies |
The scan tool displays the DVD region code. |
| DVD Region Code Changes Remaining |
Varies |
The scan tool displays the number DVD region code changes remaining. |