LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2010 >> 9-5 >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Bus And Diagnostics Communication >> Technical data >> Headlamp High Beam Control Module Scan Tool Information >> High Beam Control Module Scan Tool Data Parameters

High Beam Control Module Scan Tool Data Parameters

Parameter System State Expected Value Description
Operating Conditions:  Ignition ON
Automatic Headlamp Switch Signal - Automatic The scan tool displays either Off, Park Lamps, Automatic or Low Beam.
Front Fog Lamps Switch - Active/Inactive The scan tool displays Active or Inactive. This is the state of the front fog lamps switch.
High Beam Select Switch - Off The scan tool displays either Off, High Beam Headlamps or Flash. This is the state of the high beam select switch.
Vehicle Speed - 0 The scan tool displays the vehicle speed in km/h (MPH).
scientia non olet · About LEMON Manuals