LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2010 >> 9-5 >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Bus And Diagnostics Communication >> Technical data >> Headlamp Control Module Scan Tool Information >> Headlamp Control Module Scan Tool Data Parameters

Headlamp Control Module Scan Tool Data Parameters

Parameter System State Expected Value Description
Operating Conditions:  Ignition ON
Accelerator Pedal Position - - The scan tool displays the position of the accelerator pedal in %.
Battery Voltage - 9.0-14.0 V The scan tool displays the current battery voltage.
Front Levelling Position Sensor - - The scan tool displays the position of the front levelling sensor in mm.
Headlamp Light Distribution - Inactive The scan tool displays the current light distribution mode.
- Country Road
- City Street
- Expressway
- Bad Weather
- High Beams
Left Headlamp Horizontal Motor - - The scan tool displays the position of the left headlamp horizontal motor in °.
Left Headlamp Vertical Motor - - The scan tool displays the position of the left headlamp vertical motor in %.
Rear Levelling Position Sensor - - The scan tool displays the position of the rear levelling sensor in mm.
Right Headlamp Horizontal Motor - - The scan tool displays the position of the right headlamp horizontal motor in °.
Right Headlamp Vertical Motor - - The scan tool displays the position of the right headlamp vertical motor in %.
Low Beam Illumination Area - Left Hand Traffic The scan tool displays the current traffic mode.
- Right Hand Traffic
Steering Wheel Angle Sensor Signal - - The scan tool displays the current position of the steering wheel angle sensor in °.
Vehicle Levelling Sensors Supply Voltage - 9.0-13.0 V The scan tool displays the current levelling sensor supply voltage.
Vehicle Speed - - The scan tool displays the vehicle speed in km/h (MPH).