| Operating Conditions:
Ignition ON |
| Battery Voltage |
- |
11-14 V |
The scan tool displays V. This is the current battery voltage. |
| Left Front Damper Actuator Command |
- |
varies |
The scan tool displays mA. This is the current applied to the left front damper actuator. |
| Left Front Vertical Body Acceleration |
- |
0 m/s2 |
The scan tool displays m/s2
. This is the signal from the left front body acceleration sensor. |
| Left Front Vertical Wheel Acceleration |
- |
0 m/s2 |
The scan tool displays m/s2
. This is the signal from the left front wheel acceleration sensor. |
| Left Rear Damper Actuator Command |
- |
varies |
The scan tool displays mA. This is the current applied to the left rear damper actuator. |
| Rear Vertical Body Acceleration |
- |
0 m/s2 |
The scan tool displays m/s2
. This is the signal from the rear body acceleration sensor. |
| Right Front Damper Actuator Command |
- |
varies |
The scan tool displays mA. This is the current applied to the right front damper actuator. |
| Right Front Vertical Body Acceleration |
- |
0 m/s2 |
The scan tool displays m/s2
. This is the signal from the right front body acceleration sensor. |
| Right Front Vertical Wheel Acceleration |
- |
0 m/s2 |
The scan tool displays m/s2
. This is the signal from the right front wheel acceleration sensor. |
| Right Rear Damper Actuator Command |
- |
varies |
The scan tool displays mA. This is the current applied to the right rear damper actuator. |
| Suspension Position Sensor 5 V Reference |
- |
4.8-5.2 V |
The scan tool displays V. This is the wheel and body acceleration sensors supply voltage. |
| Suspension System Mode |
- |
Normal |
The scan tool displays Normal, Comfort or Sport Mode depending on the selected mode. |
| Tour mode switch pressed |
Comfort |
| Sport mode switch pressed |
Sport Mode |
| Vehicle Speed |
- |
0 km/h (0 MPH) |
The scan tool displays km/h (MPH) depending on the current speed of the vehicle. |