| Parking Brake Shoe Service Reset |
The electric parking brake module will reset the dynamic brake counter. When selected the EPB counter will be set to zero. |
| Parking Brake Calibration |
The electric parking brake module will activate the park brake calibration learn procedure when selected. During the learn procedure the rear brakes will cycle several times. |
| Parking Brake Cable Apply |
The electric parking brake module will apply the parking brake cable tension to diagnose a possible EPB switch failure. |
| Parking Brake Cable |
Release The electric parking brake module will release the parking brake cable to diagnose a possible EPB switch failure. |
| Parking Brake Cable Replacement |
The electric parking brake module will unwind the parking brake cable for replacement or service when selected. |
| Parking Brake Actuator DTC Reset |
The electric parking brake module will reset the park brake actuator when commanded. |
| Parking Brake Switch Procedure |
The electric parking brake module will test the parking brake switch signals to verify they are working properly or if there is an open circuit. |