| Operating Conditions:
Ignition ON |
| Driver Seat Back Switch |
Inactive |
The scan tool displays Inactive, Forward, or Rearward. This is the state of the seat recline switch. |
| Driver Seat Back Direction Command |
Inactive |
The scan tool displays Inactive, Forward, or Rearward. When the seat recline switch is pressed or when a memory recall occurs, the scan tool displays the direction the memory control module is commanding the seat recline motor. |
| Driver Seat Back Position |
Varies |
The scan tool displays 0-65, 535 counts. The hall effect sensor provides a pulse signal with each rotation of the motor that the scan tool displays as counts. High count values indicate that the seat back is in the forward position, while low count values indicate that the seat back is in the rearward position. |
| Driver Seat Cushion Front Vertical Direction Command |
Inactive |
The scan tool displays Inactive, Up or Down. When the seat front vertical switch is pressed or when a memory recall occurs, the scan tool displays the direction the memory control module is commanding the seat front vertical motor. |
| Driver Seat Cushion Front Vertical Position |
Varies |
The scan tool displays 0-65, 535 counts. The hall effect sensor provides a pulse signal with each rotation of the motor that the scan tool displays as counts. High count values indicate that the seat front vertical is in the up position, while low count values indicate that the seat front vertical is in the down position. |
| Driver Seat Cushion Front Vertical Switch |
Inactive |
The scan tool displays Inactive, Up or Down. This is the state of the seat front vertical switch. |
| Driver Seat Cushion Rear Vertical Direction Command |
Inactive |
The scan tool displays Inactive, Up or Down. When the seat rear vertical switch is pressed or when a memory recall occurs, the scan tool displays the direction the memory control module is commanding the seat rear vertical motor. |
| Driver Seat Cushion Rear Vertical Position |
Varies |
The scan tool displays 0-65, 535 counts. The hall effect sensor provides a pulse signal with each rotation of the motor that the scan tool displays as counts. High count values indicate that the seat rear vertical is in the up position, while low count values indicate that the seat rear vertical is in the down position. |
| Driver Seat Cushion Rear Vertical Switch |
Inactive |
The scan tool displays Active or Inactive. This is the state of the rear vertical downward switch. |
| Driver Seat Horizontal Direction Command |
Inactive |
The scan tool displays Inactive, Forward, or Rearward. When the seat horizontal switch is pressed or when a memory recall occurs, the scan tool displays the direction the memory control module is commanding the seat horizontal motor. |
| Driver Seat Horizontal Position |
Varies |
The scan tool displays 0-65, 535 counts. The hall effect sensor provides a pulse signal with each rotation of the motor that the scan tool displays as counts. High count values indicate that the seat horizontal position is forward, while low count values indicate that the seat horizontal position is rearward. |
| Driver Seat Horizontal Switch |
Inactive |
The scan tool displays Inactive, Forward, or Rearward. This is the state of the seat horizontal switch. |
| Memory Recall Switches |
Idle |
The scan tool displays Idle, Memory 1, Memory 2, or Memory 3. When a memory function switch is pressed, the scan tool will momentarily display the function selected. |