| Operating Conditions:
Ignition ON |
| Driver Seat Blower Duty Cycle |
Varies |
The scan tool displays 0-100 %. The value displayed is a PWM signal from the heated seat module to the logic terminal of the seat blower motor. Higher values indicate higher blower motor speeds while lower values indicate lower blower motor speeds. |
| Driver Seat Cushion Heating Command |
Inactive |
The scan tool displays Inactive or Active. This parameter displays the commanded output from the heated seat module to the seat heater elements. |
| Driver Seat Cushion Temperature Sensor |
Varies |
The scan tool displays 0-5 V. The voltage displayed is an input to the heated seat module from the seat cushion temperature sensor. Higher voltage readings indicate cooler seat temperatures while lower voltage readings indicate warmer seat temperatures. |
| Driver Seat Heating/Venting/Cooling Level |
Off |
The scan tool displays Off, Low Medium, or High. When the heated seat is active, this parameter displays the selected temperature setting. |
| Driver Seat Heating/Venting/Cooling Mode |
Off |
The scan tool displays Off, Back & Cushion Heat, or Vent. This parameter indicates the heated or vented seat mode of operation. |