| Operating condition:
Ignition ON |
| Part no. of base model |
Varies, 8-digit number |
The scan tool shows the part number of the PPS module saved in the permanent memory. |
| Battery Voltage |
Volt |
The scan tool shows battery voltage. |
| Part number, calibration |
Varies, 8-digit number |
The scan tool shows the part number of the calibration file in the PPS module. |
| Part number, production unit |
Varies, 8-digit number |
The scan tool shows the production part number of the PPS module. |
| Serial number |
Varies, 16-digit number |
The scan tool shows the manufacturer's part number |
| Manufacturer's tracing number |
Varies, 16-digit number |
The scan tool shows the 16-digit tracing number in the PPS module. |
| Passenger classification |
Empty seat |
The scan tool shows what type of individual is sitting in the passenger seat. Unknown/Calibration mode/Empty seat/Small passenger type 1/Small passenger type 2/Small passenger type 3/Small passenger type 4/Large passenger type 1/Large passenger type 2/Large passenger type 3/Large passenger type 4/Basic programming/Not available/Rear-facing child seat/Forward-facing child seat/Child seat facing undetermined direction. |
| Primary key, PPS module |
Hexadecimal value |
The scan tool shows whether any DTCs have been set in the PPS module. |
| Passenger seat status |
Empty seat |
The scan tool shows passenger seat status. Undefined/Empty Seat/Occupied/Faulty. |
| Power Moding |
Off/Radio position/Drive/Start position |
The scan tool shows the current consumption mode of the car. |
| Primary key status |
Valid/invalid |
The scan tool shows "Valid" if the primary key matches that stored in the PPS module memory. |
| Received primary key |
Hexadecimal value |
The scan tool shows a hexadecimal value indicating that the PPM module has received primary key data. |
| Software part number |
Varies, 8-digit number |
The scan tool shows the software number in the PPS module. |