LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2010 >> 9-5 >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Bus And Diagnostics Communication >> Adjustment Replacement >> Headlamp Control Module Programming and Setup >> Headlamp Control Module Replacement

Headlamp Control Module Replacement

If the headlamp control module needs to be replaced, the following procedures must be performed:

  1. Connect a scan tool to the vehicle and access SPS. Refer to SERVICE PROGRAMMING SYSTEM (SPS) 
  2. Perform the SPS function Headlamp Control Module - Programming and follow the on-screen instructions.
  3. Perform the SPS function Headlamp Control Module - Configuration & Setup and follow the on-screen instructions. On the screen Control Module - Configuration and Setup Function(s), select both control module Configuration/Reconfiguration and the appropriate control module Setup.
  4. Clear DTCs after completing the programming procedure.
scientia non olet · About LEMON Manuals