LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2009 >> 9-7X 4.2i >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 4.2L - Introduction >> Repair Instructions >> Knock Sensor Replacement >> Removal Procedure

Removal Procedure

  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
    2. Fig 1: Locating Knock Sensor Components
    GM727528Courtesy of GENERAL MOTORS CORP.
  2. Remove the knock sensor harness connector (4).
  3. Remove the knock sensor retaining bolt (3).
  4. Remove the appropriate knock sensor (1 or 2).
scientia non olet · About LEMON Manuals