LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2009 >> 9-7X 4.2i >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 4.2L - Introduction >> Repair Instructions >> Heated Oxygen Sensor Replacement - Sensor 2 >> Removal Procedure

Removal Procedure

CAUTION: Refer to Heated Oxygen Sensor Resistance Learn Reset Caution .
CAUTION: Refer to Heated Oxygen and Oxygen Sensor Caution .
    Fig 1: Locating Heated Oxygen Sensor Components (Sensor 2)
    GM729125Courtesy of GENERAL MOTORS CORP.
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Disconnect the heated oxygen sensor (HO2S) electrical connector (1).
    3. CAUTION: Refer to Excessive Force and Oxygen Sensor Caution .
  3. Remove the HO2S (2) using a J 39194-B  . See Special Tools .
scientia non olet · About LEMON Manuals