LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2009 >> 9-3 Aero, 4D Sedan, Standard >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System, V6 >> Repair Instructions >> Fuel level sensor >> To remove

To remove

  1. Remove the fuel pump. See FUEL PUMP, TO REMOVE .
  2. Detach the connector from the pump cover.
    Fig 1: Illustration For Steps 2-4
    G05052132Courtesy of SAAB-SCANIA OF AMERICA, INC.
  3. Undo the lock on the cable terminals.
  4. Pry out the fuel level sensor cable terminal, pin no. 2 (grey cable), pin no. 3 (white cable), with cables from the connector. Use 85 80 151 Kit, connector pin removal tool.
  5. Remove the fuel level sensor.
    Fig 2: Removing Fuel Level Sensor
    G05052133Courtesy of SAAB-SCANIA OF AMERICA, INC.
    IMPORTANT: Take care not to damage the fuel level sensor.
scientia non olet · About LEMON Manuals