LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2009 >> 9-3 2.0T, 2D Convertible, Standard >> Repair and Diagnosis >> Electrical >> Horns >> Lighting And Signaling Systems >> Repair Instructions - Control Modules >> Load angle sensor, front >> To remove

To remove

  1. Release the upper ball section in the link arm.
    Fig 1: Illustration For Steps 1-3
    G05055408Courtesy of SAAB-SCANIA OF AMERICA, INC.
  2. Remove the console and sensor.
  3. Separate connector.
scientia non olet · About LEMON Manuals