LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2009 >> 9-3 2.0T, 2D Convertible, Standard >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Theft Protection >> Repair Instructions >> Body Control Module (BCM) (707) >> To fit

To fit

  1. Fit the control module.
    Fig 1: Illustrations For Steps 1-2
    G05056728Courtesy of SAAB-SCANIA OF AMERICA, INC.
    IMPORTANT: Take care when plugging in the connector so as not to damage or press out the pins/sleeves in the connector. For further information regarding connectors, refer to CONNECTORS, HANDLING AND INSPECTION .
  2. Plug in the connector.
  3. Fit the lower section of the dashboard. See SOUND INSULATION PANEL, PASSENGER .
    Fig 2: Lower Section Of Dashboard
    G05056729Courtesy of SAAB-SCANIA OF AMERICA, INC.
  4. If the control module has been replaced:  Carry out procedures after changing a control module .