LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2008 >> 9-5 2.3T, 4D Sedan, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Repair Instructions >> Output Shaft Speed Sensor >> To remove

To remove

  1. Remove the battery cover and the battery.
    Fig 1: Illustration For Step 1-3
    G05040185Courtesy of SAAB-SCANIA OF AMERICA, INC.
  2. Remove the MAXI fuse board and place it to one side. Remove the battery tray.
  3. Disconnect the electrical distribution unit and move it aside.
  4. Clean the area round the sensor. Remove the retaining bolt and withdraw the sensor.
    Fig 2: Illustration For Step 4-5
    G05040186Courtesy of SAAB-SCANIA OF AMERICA, INC.
  5. Unplug the sensor's connector.
scientia non olet · About LEMON Manuals