To fit

Put the battery in place. Slide it back until the rear edge latches in place.

Fig 1: Illustration For Steps 1-2
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Fit the screw.
IMPORTANT: Check that the battery is properly secured.
Connect the positive cable of the battery.

Fig 2: Illustration For Step 3
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Connect the negative cable of the battery.

Fig 3: Illustration For Step 4
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Attach the battery drain hose.
Fit the battery cover.
Reset the car; see Procedure after battery disconnection .