LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2007 >> 9-7X 4.2i >> Repair and Diagnosis >> Engine Mechanical >> Engine Exhaust >> Repair Instructions >> Resonator Replacement >> Installation Procedure

Installation Procedure

  1. Install the new resonator and tailpipe assembly to the muffler.
  2. Attach the resonator and tailpipe to the hanger insulators.
    Fig 1: Locating Exhaust Hangers
    GM753688Courtesy of GENERAL MOTORS CORP.
  3. Loosely install the clamp to secure the resonator to the muffler.
    NOTE: Refer to Fastener Notice .
  4. Align the tailpipe in the proper position.

    Tighten:  Tighten the clamp nuts to 50 N.m (37 lb ft).

  5. Inspect the exhaust system for leaks and underbody contact.
  6. Lower the vehicle.
scientia non olet · About LEMON Manuals