LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2007 >> 9-7X 4.2i >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Data Communications >> Repair Instructions >> Liftgate Control Module Replacement >> Installation Procedure

Installation Procedure

  1. Install the module to the liftgate.
    Fig 1: Liftgate Module Electrical Connectors
    GM749979Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  2. Install the bolts that retain the module to the liftgate.

    Tighten:  Tighten the bolts to 10 N.m (89 lb in).

  3. Connect the electrical connectors (3) as necessary.
  4. Install the liftgate trim panel. Refer to Liftgate Trim Panel Replacement .
  5. Program the liftgate control module. Refer to Control Module References .
scientia non olet · About LEMON Manuals