LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2007 >> 9-5 4D Sedan, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Stabilizer System, Esp >> Repair Instructions >> Yaw Rate Sensor >> To remove

To remove

  1. Plug in the gyro sensor.
  2. Fit the gyro sensor to the bracket. Use a large screwdriver to prise aside the air duct slightly to access the left-hand screw.
    IMPORTANT:

    Fit the gyro sensor with the connector and arrow pointing forward in the car.

    Fig 1: Illustration For Steps 2-4
    G05041177Courtesy of SAAB-SCANIA OF AMERICA, INC.

    Tightening torque up to and including Vehicle Identification Number 73514907: 10 Nm (7 lbf ft) 

    Tightening torque from and including Vehicle Identification Number 73514908: 8 Nm (6 lbf ft) 

  3. Manual gearbox:  Fit the gear lever housing, see TO FIT .

    Automatic transmission:  Fit the selector lever housing, see TO FIT .

  4. Fit the centre console, see TO FIT .
scientia non olet · About LEMON Manuals