LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2007 >> 9-5 4D Sedan, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Repair Instructions >> Input Shaft Speed Sensor >> To remove

To remove

  1. Remove the battery cover and the battery.
    Fig 1: Illustration For Step 1-2
    G05040181Courtesy of SAAB-SCANIA OF AMERICA, INC.
  2. Remove the MAXI fuse holder from the battery tray and place it to one side. Remove the battery tray.
  3. Undo the battery cable bracket.
  4. Clean the area round the sensor. Remove the sensor's retaining bolt.
  5. Remove the sensor.
    Fig 2: Illustration For Step 4-5
    G05040182Courtesy of SAAB-SCANIA OF AMERICA, INC.
  6. Unplug the connector.
scientia non olet · About LEMON Manuals