LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2007 >> 9-5 4D Sedan, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Repair Instructions >> Input Shaft Speed Sensor >> Fitting

Input Shaft Speed Sensor: Fitting

  1. Plug in the sensor's connector.
    Fig 1: Illustration For Step 1-4
    G05040183Courtesy of SAAB-SCANIA OF AMERICA, INC.
  2. Fit the sensor in place.
  3. Tighten the sensor's retaining bolt.

    Tightening torque: 6 Nm (4.5 lbf ft) 

  4. Fit the battery cable bracket.
    Fig 2: Illustration For Step 4-5
    G05040184Courtesy of SAAB-SCANIA OF AMERICA, INC.
  5. Fit the battery tray, MAXI fuse board, battery and battery cover.
  6. Set the right time on the clock.
scientia non olet · About LEMON Manuals