LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2007 >> 9-3 Aero, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Basic Engine 4-CYL) >> Description & Operation >> Engine Block >> Cylinder Block

Cylinder Block

WARNING: This page is about a different variant/trim than selected.

The light alloy cylinder block is manufactured in one piece with press-fit cylinder bores of steel. Passageways for the lubricating system are also drilled inside the block. The main bearing caps are not separate but integrated in a common bed plate. There are two tunnels integrated in the block for the balancer shafts. Loose non-exchangeable bearing bushings are press-fitted for the inner bearing seats.

scientia non olet · About LEMON Manuals