LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2007 >> 9-3 Aero, 2D Convertible, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Basic Engine V6 >> Repair Instructions >> Engine mounting, right >> To remove

To remove

  1. Raise the car.
  2. CV:  Remove CHASSIS REINFORCEMENT, FRONT SUBFRAME, CV, PETROL .
  3. Fit 83 96 145 Centering fixture, subframe - engine on the engine's subframe and 83 96 152 Centering tool, power train with 32 025 059 SUPPORT . First remove the two long supports. Relieve the load from the engine.
    Fig 1: Identifying Engine Mounting - Right
    G05053754Courtesy of SAAB-SCANIA OF AMERICA, INC.
  4. Lower the car.
    IMPORTANT: When removing the air cleaner casing cover, be careful not to damage the brake vacuum pump sensor.
  5. Remove the upper section of the air cleaner.
    Fig 2: Removing Upper Section Of Air Cleaner
    G05053755Courtesy of SAAB-SCANIA OF AMERICA, INC.
  6. Remove the lower section of the air filter.
    Fig 3: Removing Lower Section Of Air Filter
    G05053756Courtesy of SAAB-SCANIA OF AMERICA, INC.
  7. Remove the engine pad.
    Fig 4: Removing Engine Pad
    G05053757Courtesy of SAAB-SCANIA OF AMERICA, INC.
  8. Remove the power steering pipe clip from the engine mounting.
    Fig 5: Removing Power Steering Pipe Clip From Engine Mounting
    G05053758Courtesy of SAAB-SCANIA OF AMERICA, INC.
  9. Remove the engine mounting from the engine (some models do not have a lower bolt).
    NOTE: The hole of the lower bolt is slotted.
scientia non olet · About LEMON Manuals