To fit
- Fit the door module pressing it obliquely upward so that the clip engages.
Courtesy of SAAB-SCANIA OF AMERICA, INC.
- When changing the driver door module:
Fit the door trim screw.
- When changing the driver door module:
Affix the cell block with double-sided tape. The use of 16-30 20 807 is recommended.
- Make sure the door trim clips are in place and intact. Replace the clips if necessary.
- Fit the door trim, see DOOR TRIM, FRONT
.
- Cars with pinch protection:
Perform Programming of the pinch protection, see Calibration of Pinch Protection .
- If the control module has been changed,
perform Measures after changing the control module, see MEASURES AFTER CHANGING THE CONTROL MODULE