LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2007 >> 9-3 2.0T, 2D Convertible, Standard >> Repair and Diagnosis >> Steering >> Steering Linkage >> Repair Instructions >> Column Integration Module, CIM (703) >> To remove

To remove

  1. Carry out "PROCEDURE BEFORE REMOVING THE CONTROL MODULE ".

    Remove the STEERING WHEEL .

  2. Remove the gaiter from the control module and press it against the instrument panel.
    Fig 1: Removing Gaiter And Control Module
    G05061115Courtesy of SAAB-SCANIA OF AMERICA, INC.
  3. Remove the control module from the steering shaft. Press in the steering column while pulling the control module outwards.
    Fig 2: Removing Control Module And Steering Shaft
    G05061116Courtesy of SAAB-SCANIA OF AMERICA, INC.
    IMPORTANT:

    Take care when releasing the locking mechanism on the connector so as not to damage the connector. Pull the halves straight apart to avoid bending the pins.

  4. Unplug the connector and remove the clip.
    Fig 3: Identifying Connector And Clip
    G05061117Courtesy of SAAB-SCANIA OF AMERICA, INC.
scientia non olet · About LEMON Manuals