LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2007 >> 9-3 2.0T, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Fuel System V6) >> Repair Instructions >> Control Module, Fuel Pump (697) >> To fit

To fit

WARNING: This page is about a different variant/trim than selected.
  1. Position the control module on the insulation and fit a cable tie.
    Fig 1: Plugging In Connector
    G05057528Courtesy of SAAB-SCANIA OF AMERICA, INC.
  2. Plug in the connector and position the control module.
  3. 4D/5D:  Reposition the right corner of the rear carpeting.
    IMPORTANT: Take care when plugging in the connector so as not to damage or press out the pins/sleeves in the connector.
  4. 4D/5D:  Fit FRONT SEAT (2006) or FRONT SEAT (2007) or FRONT SEAT (2008) .

    CV:  Fit SEAT CUSHION, BACKREST, CV (2006) or SEAT CUSHION, BACKREST, CV (2007) or SEAT CUSHION, BACKREST, CV (2008) .

scientia non olet · About LEMON Manuals