LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2007 >> 9-3 2.0T, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Main Instrument Unit) >> Specifications >> Test readings, control module connections >> Control module connection

Control module connection

WARNING: This page is about a different car, the 2006 Saab 9-5. However, it is still accessible from the selected car via links, so may be relevant.
CONTROL MODULE CONNECTION

Pin Component/Function In/Out Test conditions   Across Test reading See
1 Battery voltage +30 In     1-3 B+  
2 Parking heater, indication In     2-3    
  Activated   <0.5 V  
  Not activated   B+  
3 Ground In Ignition ON   1-3 B+  
4 No connection            
5 No connection            
6 No connection            
7 No connection            
8 No connection            
9 No connection            
10 No connection            
11 No connection            
12 No connection            
13 No connection            
14 No connection            
15 Ground, Sensor ground, fuel level sensor Out Ignition ON   15-3 <0.1 V  
16 Xenon lamp system indicator In Ignition ON On 16-B- 0 V  
Out 16-B- ~9 V  
17 Battery voltage +15 In Ignition ON   17-3 B+  
18 I-bus (-) In/Out Ignition ON   18-3 2.5 V  
19 I-bus (+) In/Out Ignition ON   19-3 2.5 V  
20 P bus (-) In/Out Ignition ON   20-3 2.5 V  
21 P bus (+) In/Out Ignition ON   21-3 2.5 V  
22 No connection            
23 Lights-on indicator lamp In Ignition ON On 23-B B+  
Out 23-B- 0 V  
24 Main beam indicator lamp In Ignition ON On 24-B B+  
Out 24-B- 0 V  
25 Engine oil pressure warning lamp In Ignition ON On 25-B- 0 V  
Out 25-B B+  
26 No connection            
27 Warning lamp, brake fluid level In Ignition ON On 27-B- 0 V  
Out 27-B- B+  
28 Warning lamp, handbrake In Ignition ON On 28-B- 0 V  
Out 28-B- B+  
29 No connection            
30 Warning lamp, charging In Ignition ON On 30-B- 0 V  
Out 30-B- B+  
31 Sensor, fuel level In Ignition ON   31-3 0.5-3.7 V  
32 No connection            
> = greater than; < = less than; ~ = alternating current (LP: LOGIC PROBE P = select pulse; p = visible pulse)