LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2007 >> 9-3 2.0T, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Automatic Transmission) >> Adjustment-Replacement >> Transmission control module, TCM >> To fit

To fit

WARNING: This page is about a different car, the 2005 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fit the control module.
    Fig 1: Illustration For Step 2
    G03835468Courtesy of SAAB-SCANIA OF AMERICA, INC.
    IMPORTANT: Take care when plugging in the connector so as not to damage or press out the pins/sleeves in the connector. For further information regarding connectors, refer to CONNECTORS, HANDLING AND INSPECTION  .
  2. Plug in the connectors.
  3. Fit the battery cooling pipe.
    Fig 2: Illustration For Step 3-4
    G03835469Courtesy of SAAB-SCANIA OF AMERICA, INC.
  4. Fit the battery cover.
  5. Perform PROCEDURES AFTER FITTING THE CONTROL MODULE  and service programming, if necessary.
  6. If a new control module has been fitted, it must be adapted, see ADAPTATION, RESETTING  .
scientia non olet · About LEMON Manuals