To fit

IMPORTANT:

Do not spray any kind of contact spray onto the internal contact pins/sleeves. Do not blow clean with compressed air.

Check the gasket on the new control module. Fit it carefully by holding the edges with one hand an slowly lowering it so that the valves and contacts are in the right place.
IMPORTANT:
Grip the control module by its edges only when removing/fitting. The control module can be damaged by pressure on the top.

Fig 1: Illustration For Step 1
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Fasten the bolts and torque tighten them in the illustrated order.
Tightening torque 3 Nm ± 0.3 (2.15 ± 0.21 lbf ft)

Fig 2: Identifying Bolts
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Fit the bracket on the hydraulic unit.

Fig 3: Illustration For Step 3
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Fit ESP UNIT WITH CONTROL MODULE .
Perform SPARE PARTS PROGRAMMING, ESP .