LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2006 >> 9-3 2.0T, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 108 (Audio System With Navigation) >> Repair Instructions >> Radio receiver, console >> To remove

To remove

WARNING: This page is about a different car, the 2007 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the radio receiver:

    RADIO RECEIVER, TMC, 4D 

    RADIO RECEIVER, TMC, 5D 

    RADIO RECEIVER, TMC, CV 

    RADIO RECEIVER, SATELLITE RADIO, 4D

    RADIO RECEIVER, SATELLITE RADIO, 5D

    RADIO RECEIVER, SATELLITE RADIO, CV

  2. Remove the console:

    4D:  Remove the nuts (A) and the screw (B).

    Fig 1: Removing Nuts & Screw
    G05173352Courtesy of SAAB-SCANIA OF AMERICA, INC.

    5D:  Remove the wiring harness clip (A) and press in the console locking clip (B), pull it back and lift out the console (C).

    Fig 2: Identifying Radio Receiver Console
    G05173353Courtesy of SAAB-SCANIA OF AMERICA, INC.

    CV:  Remove the nuts.

    Fig 3: Removing Nuts
    G05173354Courtesy of SAAB-SCANIA OF AMERICA, INC.