LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2006 >> 9-3 2.0T, 2D Convertible, Standard >> Repair and Diagnosis >> Engine Performance >> System >> TRIONIC T8 Fuel Control System >> Repair Instructions >> Accelerator position sensor (379) >> To remove

To remove

  1. Move the seat as far back as possible.
  2. Remove the center console front side piece.
    Fig 1: Removing Center Console Front Side Piece
    G05052371Courtesy of SAAB-SCANIA OF AMERICA, INC.
  3. Remove the 2 sound insulating baffle screws from the climate housing and instrument panel.
    Fig 2: Removing Sound Insulating Baffle Screws From Climate Housing & Instrument Panel
    G05052372Courtesy of SAAB-SCANIA OF AMERICA, INC.
  4. Lower the sound insulating baffle and unplug the connector to the position sensor.
    Fig 3: Removing Accelerator Position Sensor Nuts
    G05052373Courtesy of SAAB-SCANIA OF AMERICA, INC.
  5. Remove the three position sensor nuts.