LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2006 >> 9-3 2.0T, 2D Convertible, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Basic Engine 4-CYL >> Repair Instructions >> Engine mounting, right >> To remove

To remove

  1. Cover the wings and raise the car.
  2. CV:  Remove CHASSIS REINFORCEMENT, FRONT SUBFRAME, CV, PETROL .
  3. Open the power steering pipe's clips on the subframe.
    Fig 1: Opening Power Steering Pipe Clips On Subframe
    G05051828Courtesy of SAAB-SCANIA OF AMERICA, INC.
  4. Fit 83 96 152 CENTERING KIT, ENGINE TO THE SUBFRAME . See also CENTERING TOOL, ENGINE AND SUBFRAME .
  5. Lower the car.
  6. Remove the turbocharger intake hose, unplug the mass air flow sensor connector.
    Fig 2: Removing Turbocharger Intake Hose
    G05051829Courtesy of SAAB-SCANIA OF AMERICA, INC.
  7. Remove the air cleaner cover and the air cleaner. Detach the inlet hose and remove the air cleaner casing.
  8. Remove the engine pad from the body and bracket.
    Fig 3: Removing Engine Pad From Body & Bracket
    G05051830Courtesy of SAAB-SCANIA OF AMERICA, INC.
scientia non olet · About LEMON Manuals