LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2006 >> 9-3 2.0T, 2D Convertible, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Basic Engine 4-CYL >> Repair Instructions >> Engine mounting, left-hand >> To remove

To remove

  1. Place drapes over the wings to keep the paintwork clean and protect it from damage. Raise the car.
  2. CV:  Remove the cross brace. See CHASSIS REINFORCEMENT, FRONT SUBFRAME, CV, PETROL
  3. Fit 83 96 152 CENTERING TOOL, POWERTRAIN  on the subframe. See also CENTERING TOOL, ENGINE AND SUBFRAME .
    Fig 1: Identifying Lower Car Area
    G05051820Courtesy of SAAB-SCANIA OF AMERICA, INC.
  4. Lower the car.
  5. Remove the battery.
    Fig 2: Removing Battery & Battery Tray
    G05051821Courtesy of SAAB-SCANIA OF AMERICA, INC.
  6. Remove the battery tray.
  7. Remove the ground cable from the engine mounting.
    Fig 3: Removing Ground Cable From Engine Mounting
    G05051822Courtesy of SAAB-SCANIA OF AMERICA, INC.
  8. Remove the engine pad bolts from the gearbox bracket.
    Fig 4: Removing Engine Pad, Gearbox Bracket & Ground Cable
    G05051823Courtesy of SAAB-SCANIA OF AMERICA, INC.
  9. Remove the bolts in the gearbox bracket. Lift out the bracket.
  10. Remove the engine pad bolts from the body.
  11. Remove the engine pad.
scientia non olet · About LEMON Manuals