LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2005 >> 9-7X Linear >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - 4L60-E/4L65-E - Introduction & Repair Procedures >> Repair Instructions >> Floor Shift Control Knob Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Removing/Installing Floor Shift Control Knob
    GM1593081Courtesy of GENERAL MOTORS CORP.
  1. The floor shift control knob and boot are serviced as an assembly.
  2. Loosen the set screw (2).
  3. Push in at the base of the boot to release the locking tabs (1) from the console assembly.
  4. Pull up to remove the knob and boot assembly from the transmission control (3).
scientia non olet · About LEMON Manuals