LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2005 >> 9-7X Linear >> Repair and Diagnosis >> Electrical >> Horns >> Repair Instructions >> Horn Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Removing/Installing Horn Assembly
    GM687551Courtesy of GENERAL MOTORS CORP.
  1. Install the horn assembly to the body.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the bolt that retains the horn assembly to the body.

    Tighten:  Tighten the bolt to 10 N.m (88 lb in).

  3. Connect the horn assembly electrical connector.
  4. Install the battery ventilation hose to the battery carrier.
scientia non olet · About LEMON Manuals