LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2005 >> 9-7X Linear >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Panel, Gages, And Console >> Repair Instructions >> Ignition Switch Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Removing/Installing Ignition Switch
    GM1554774Courtesy of GENERAL MOTORS CORP.
  1. Locate the ignition switch to the console.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the screws securing the switch to the console.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

  3. Connect the electrical connector.
  4. Install the ignition switch lock cylinder. Refer to Ignition Switch Lock Cylinder Replacement .
scientia non olet · About LEMON Manuals