LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2005 >> 9-7X Linear >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Panel, Gages, And Console >> Repair Instructions >> Ignition Switch Lock Cylinder Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Removing/Installing Ignition Switch
    GM1554774Courtesy of GENERAL MOTORS CORP.
  1. Slide the lock cylinder into the ignition switch housing.
  2. Insure the lock tab on the cylinder is secure.
  3. Install the ignition switch. Refer to Ignition Switch Replacement .
  4. Install the console shift lever bezel. Refer to Console Shift Lever Bezel Replacement .
scientia non olet · About LEMON Manuals