LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2005 >> 9-7X Linear >> Repair and Diagnosis >> Body & Frame >> Sun Roof/T-Top/Convertible Top >> Repair Instructions >> Sunroof Module Assembly Replacement >> Removal Procedure

Removal Procedure

    IMPORTANT: Do not remove the headliner.
  1. Lower the headliner. Refer to Headliner Replacement in Interior Trim.
    2. Fig 1: Accessing Sunroof Assembly Electrical Connector
    GM749612Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the sunroof harness electrical connector.
    3. IMPORTANT: Do not remove the drain hoses.
  3. Disconnect the drain hoses from the sunroof assembly. Refer to the following procedures:
    4. Fig 2: Removing/Installing Sunroof Module Assembly
    GM749611Courtesy of GENERAL MOTORS CORP.
  4. Support the sunroof with an assistant.
  5. Remove the bolts that retain the sunroof module assembly to the roof panel
  6. Remove the sunroof module assembly from the vehicle and place on a clean, prepared surface with an assistant.
  7. Remove the sunroof motor/actuator from the sunroof module assembly. Refer to Sunroof Motor/Actuator Replacement .
  8. Remove the sunroof window from the sunroof module assembly. Refer to Sunroof Window Replacement .
  9. Remove the sunroof sunshade panel from the sunroof module assembly. Refer to Sunroof Sunshade Panel Replacement .
scientia non olet · About LEMON Manuals