Installation Procedure

Fig 1: View Of Bulkhead Connector

Courtesy of GENERAL MOTORS CORP.

Install the lumbar switch to the switch bezel, verifying that the retaining tabs are fully seated. Refer to Lumbar Switch Replacement - Front
Install the seat switches to the switch bezel, verifying that the retaining tabs are fully seated. Refer to Seat Switch Replacement - Power

Fig 2: Removing/Installing Seat Switch Bezel Screws

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the switch bezel to the seat with the 3 screws.
Tighten: Tighten the front seat switch bezel screws to 3 N.m (26 lb in).