LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2005 >> 9-7X Linear >> Repair and Diagnosis >> Body & Frame >> Seats >> Repair Instructions >> Seat Back Panel Replacement - Front >> Installation Procedure

Installation Procedure

    Fig 1: Removing/Installing Seat-Back Frame Panel
    GM753523Courtesy of GENERAL MOTORS CORP.
  1. Install the seat back over the top of the seat-back frame.
    2. Fig 2: Removing/Installing Seat Back Panel Push-Pin Fasteners
    GM753491Courtesy of GENERAL MOTORS CORP.
  2. Install the panel to the seat-back frame with 2 push-pin fasteners (1) to each side of the panel.
    3. Fig 3: Removing/Installing Bottom Panel Push-Pin Fastener
    GM784461Courtesy of GENERAL MOTORS CORP.
  3. Install the push-pin fastener (1) to the bottom of the panel.
    4. Fig 4: Removing/Installing Lumbar Cables
    GM753524Courtesy of GENERAL MOTORS CORP.
  4. Install the lumbar cables to the panel clips.
  5. Install the front seat back cover and pad. Refer to Seat Back Cover and Pad Replacement - Front .
  6. Install the front bucket seat assembly to the vehicle. Refer to Seat Replacement - Front Bucket .
scientia non olet · About LEMON Manuals