LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2005 >> 9-7X Linear >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Controls - 4.2L - Introduction >> Repair Instructions >> Accelerator Pedal Position (APP) Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of Accelerator Pedal Position Sensor
    GM742494Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the accelerator pedal position (APP) sensor electrical connector.
  2. Remove the APP sensor retaining fasteners.
  3. Remove the APP sensor (2) from the vehicle.
scientia non olet · About LEMON Manuals