"Current Status"
A number is displayed here which indicates which stage the diagnostic procedure is in. If the number is 130 or lower then no fault has yet been detected in the ignition discharge module.
The following P trouble codes can block diagnosis: P0171, P0172, P0336, P0337, P1171, P1172, P1181, P1182, P1310, P1320 and P1460. Diagnosis is also blocked if the coolant temperature is less than 15°C (59 °F). If any of the trouble codes above are found, an ordinary fault diagnosis should be carried out.
CURRENT STATUS
| Value | Meaning |
|---|---|
| 0 | The diagnosis has not yet begun during this driving cycle |
| 1-19 | Conditions for the diagnosis before starter motor cranking is begun are not fulfilled: 1=P trouble code stored (according to list of ignition cassette trouble codes above) 2= Fuel shut-off 3= Coolant temperature too low 4= Battery voltage too low 5= Number of P trouble codes is 6 or more (applies to all P trouble codes) |
| 20 | Conditions for the diagnosis before starter motor cranking are fulfilled: |
| 21-39 | The diagnosis is interrupted during starter motor cranking: 21=P trouble code stored (according to list of ignition cassette trouble codes above) 22= Fuel shut-off 23= Coolant temperature too low 24= Battery voltage too low 25= Number of P trouble codes is 6 or more (applies to all P trouble codes) 26= Starter motor cranking interrupted too early |
| 40 | The engine has not started. No faults detected in the ignition discharge module. Another fault, e.g. fuel system, is preventing engine start |
| 50 | The engine has started. So far no faults detected in the ignition discharge module |
| 51-69 | Conditions for the diagnosis before synchronization are not fulfilled: 51=P trouble code stored (according to list of ignition cassette trouble codes above) 52= Fuel shut-off 53= Coolant temperature too low 54= Battery voltage too low 55= Number of P trouble codes is 6 or more (applies to all P trouble codes) |
| 70 | Conditions for the diagnosis before synchronization are fulfilled. So far no faults detected in the ignition discharge module |
| 71-89 | The diagnosis is interrupted during synchronization: 71=P trouble code stored (according to list of ignition cassette trouble codes above) 72= Fuel shut-off 73= Coolant temperature too low 74= Battery voltage too low 75= Number of P trouble codes is 6 or more (applies to all P trouble codes) |
| 90 | The engine is synchronized. So far no faults detected in the ignition discharge module. |
| 91-109 | Conditions for the diagnosis after synchronization are not fulfilled: 91=P trouble code stored (according to list of ignition cassette trouble codes above) 92= Fuel shut-off 93= Coolant temperature too low 94= Battery voltage too low 95= Number of P trouble codes is 6 or more (applies to all P trouble codes) 96= Evaluation of misfiring not yet begun |
| 110 | Conditions for the diagnosis after synchronization are fulfilled. So far no faults detected in the ignition discharge module |
| 111-129 | The diagnosis is interrupted after synchronization: 111=P trouble code stored (according to list of ignition cassette trouble codes above) 112= Fuel shut-off 113= Coolant temperature too low 114= Battery voltage too low 115= Number of P trouble codes is 6 or more (applies to all P trouble codes) |
| 130 | All diagnoses processed. So far no faults detected in the ignition discharge module. |
| 131- | Fault detected |