Menu: "Read values"
READ VALUES TEXT DESCRIPTION
| Text | Min. | Max. | Description |
|---|---|---|---|
| Wheel Speed Front Left | 0 km/h (0 mph) |
250 km/h (155 mph) |
Frequency from wheel speed sensor converted to km/h (mph). Normal value for a stationary car is 2 km/h (1 mph). |
| Wheel Speed Front Right | 0 km/h (0 mph) |
250 km/h (155 mph) |
Frequency from wheel speed sensor converted to km/h (mph). Normal value for a stationary car is 2 km/h (1 mph). |
| Wheel speed, RL | 0 km/h (0 mph) |
250 km/h (155 mph) |
Frequency from wheel speed sensor converted to km/h (mph). Normal value for a stationary car is 2 km/h (1 mph). |
| Wheel Speed Rear Right | 0 km/h (0 mph) |
250 km/h (155 mph) |
Frequency from wheel speed sensor converted to km/h (mph). Normal value for a stationary car is 2 km/h (1 mph). |
| Wheel Sensors Output | 0 V | 13 V | The value can be used to determine whether the control module has lost contact with one of the wheel sensors. If there is contact, the value should be approximately 3.4 V DC. The following readings will be obtained if the contact is defective: front left 2.7 V DC front right 0.80 V DC rear left 1.4 V DC rear right 2.1 V DC. |
| Steering Angle | -530° | +530° | Shows the current steering wheel position. |
| Yaw Rate | -139°/s | +139°/s | Shows the car's yaw rate |
| Brake Pressure Sensor | -20 bar | +270 bar | Pressure from brake pedal and master cylinder |
| Lateral Acceleration | 0 m/s2 | 49 m/s2 | |
| Brake Light | 0 V | 18 V | |
| Engine Speed (Bus from ECM) | 0 RPM | 7000 RPM | |
| Max. Engine Torque (Bus from ECM) | 0 Nm | 400 Nm | |
| Engine Torque (Bus from ECM) | -100 Nm | +400 Nm | Shows engine torque. |
| Accelerator Position (Bus from ECM) | 0 % | 100 % |