Programming, headlamps: Notes
The vehicle can be programmed for three different types of headlamp logic:
IMPORTANT:
Switching between main and dipped beams is only possible with the light switch in position 2. Applies to all alternatives.
Fuse 35 has been removed from cars on markets where daytime running lights are not used. Program alternatives 1 and 2.
While the engine is being started, dipped beam is turned off. This is irrespective of the program alternative if the light switch is in position 0 or 1, but for safety reasons it is maximized to 20 seconds.
Fuse 35 has been removed from cars on markets where daytime running lights are not used. Program alternatives 1 and 2.
While the engine is being started, dipped beam is turned off. This is irrespective of the program alternative if the light switch is in position 0 or 1, but for safety reasons it is maximized to 20 seconds.