To remove

Cover the wings and raise the car.
CV: Remove the cross brace, see CHASSIS REINFORCEMENT, FRONT SUBFRAME, CV .
Undo the bolts on the power steering pipe clamps on the subframe.

Fig 1: Illustration For Step 3
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Fit 83 96 152 CENTERING KIT, ENGINE to the subframe. See also 83 96 145 CENTERING FIXTURE, SUBFRAME - ENGINE .

Fig 2: Illustration For Step 4
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Undo the rear bolts securing the torque arm.

Fig 3: Illustration For Step 5
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Raise the centering drift bolts so that the slits in the adjustment bolts are fully visible.
Lower the car and remove the upper engine cover.

Fig 4: Illustration For Step 7-9
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Remove the turbocharger intake hose, unplug the mass air flow sensor connector.
Remove the air cleaner cover and the air cleaner. Detach the inlet hose and remove the air cleaner casing.
Remove the engine pad from the body and the bracket.

Fig 5: Illustration For Step 10
Courtesy of SAAB-SCANIA OF AMERICA, INC.